Discover our highly wear-resistant, impact-resistant range of high-performance polymer sheets and precision components.
Within mechanical engineering and heavy industry tribology, reducing surface friction and halting premature wear is crucial to achieving high system uptime. Standard ultra-high molecular weight polyethylene (UHMWPE) sheets have long served as reliable lining materials due to their exceptional impact strength and chemical inertness. However, under high load, high velocity, and dry running conditions, conventional polymers run into thermal and mechanical boundaries. That is where Molybdenum Disulfide (MoS2) filled UHMWPE steps in.
By blending ultra-high molecular weight polyethylene with targeted concentrations of Molybdenum Disulfide (MoS2), we engineer a specialized composite matrix. This particulate additive acts as a highly effective solid-state lubricant. As wear occurs, the microscopic MoS2 particles distribute across the sliding interface, filling surface micro-asperities. The result is a self-replenishing, low-friction layer that drives down the material’s sliding coefficient of friction while increasing its load-bearing capacity (PV limit).
MoS2 filling minimizes micro-adhesive wear and structural fatigue. Sand slurry test results indicate that MoS2-modified UHMWPE boasts up to a 20-30% reduction in material erosion compared to unmodified UHMWPE grade PE1000.
Components operating in highly abrasive dry-run scenarios—such as chain guides, bulk hoppers, and chute liners—experience a dramatically extended lifetime, reducing costly maintenance intervals.
By dropping the static and dynamic coefficients of friction, drive motors on conveyor belts and processing machinery consume less starting torque and operating power, optimizing total system energy consumption.
Technical comparison between standard industrial polymers and MoS2-filled UHMWPE sheets.
| Property / parameter | Standard PE1000 | UHMWPE + MoS2 (Self-Lubricating) | Testing Standard Reference |
|---|---|---|---|
| Molecular Weight (Average) | 4.5 - 9.2 Million g/mol | 4.5 - 9.0 Million g/mol | Gel Permeation Chromatography |
| Density | 0.93 - 0.94 g/cm³ | 0.95 - 0.97 g/cm³ | ISO 1183 / ASTM D792 |
| Coefficient of Sliding Friction (Dry) | 0.12 - 0.17 | 0.07 - 0.10 | ASTM G115 / ISO 7148 |
| Tensile Strength at Yield | 22 MPa | 25 MPa | ISO 527-2 / ASTM D638 |
| Relative Abrasion Loss (Sand Slurry) | 100 (Benchmarked) | 75 - 80 (Lower is Better) | ISO 15527 / Dry Sand Rubber Wheel |
| Max Short-Term Service Temp | 120 °C | 130 °C | Deflection Temperature Method |
| Shore D Hardness | 60 - 65 | 66 - 70 | ISO 868 / ASTM D2240 |
Deploying UHMWPE + MoS2 composites across core global industries to optimize machine throughput and lower overheads.
Dry transport of raw iron ore, coal, quartz, and heavy minerals generates intense friction and electrostatic charges. Liners made of MoS2-filled UHMWPE prevent material sticking (carry-back) and eliminate premature wall wear on chutes, hoppers, dump trucks, and railcar interiors. The solid lubricant helps handle sluggish material flow smoothly without requiring mechanical vibrators or water-flush systems.
Dock fender pads are subjected to high shear stress and relentless marine environmental degradation. Standard plastics wear down under heavy ship hulls, while rubbers break down under constant friction. Heavy-duty dock fenders engineered with UHMWPE + MoS2 offer smooth sliding properties, protecting the structural integrity of both dock systems and vessels. These components resist marine growth, UV damage, and chemical breakdown from saltwater exposure.
High-speed sorting systems, pharmaceutical packaging lines, and conveyor networks require quiet operation with minimal mechanical friction. Using MoS2-modified components, such as wear strips, curve tracks, starwheels, and gear guides, ensures systems operate without messy liquid lubricants. This keeps the line sterile, clean, and grease-free.
Premium final products come from high-quality, pure raw materials. In our group's partner operations, such as Ya’an Times Biotech Co., Ltd. (located in the diverse terrains of Ya’an, Sichuan, where altitudes range from 525 to 7,555 meters), high-purity natural source extracts like camellia, eucalyptus, turmeric, and pepper oils are produced under strict extraction protocols. This demonstrates our group's broad dedication to quality assurance, purity controls, and material integrity across both industrial polymers and biochemical feedstocks.
Just as Times Biotech carefully selects premium plants to manufacture pure raw material oils for the cosmetic and food sectors, Tianjin Beyond Technology Development Co., Ltd. maintains strict quality standards for polymer raw materials. We source from world-class suppliers like TICONA, LG, and Sinopec to ensure our industrial UHMWPE, HDPE, and composite formulations meet the highest standards of reliability and performance.
Tianjin Beyond Technology Development Co., Ltd. operates a modern, integrated manufacturing complex covering approximately 50,000 square meters. We coordinate multiple manufacturing channels under one roof: compression molding systems, continuous ram extrusion lines, custom CNC machining cells, and an independent laboratory with dedicated R&D facilities.
Our facility is equipped with advanced manufacturing systems, including high-capacity hydraulic compression presses, gantry CNC lathes, high-precision milling machines, and large-format CNC engraving systems. This enables us to maintain tight tolerances on customized parts, deliver large volumes efficiently, and maintain consistent quality on complex designs.
We source our raw materials directly from trusted global polymer leaders, including TICONA, LG, and Sinopec. Combined with our strict internal ISO 9001:2015 quality control systems, we prevent sub-standard materials from entering production, ensuring every batch meets international industrial standards.
How Beyond Technology is steering structural engineering plastics toward greener, stronger, and smarter futures.
Bridging the gap between raw sheet supply and ready-to-install custom engineering components.
We design custom polymer formulations to meet specific application requirements. This includes antistatic sheets, fire-retardant (UL94 V-0) grades, radiation-shielding boron-doped matrices, self-lubricating MoS2 blends, and high-contrast double-color wear indicator plates.
Using our gantry CNC milling, routing, and drilling machinery, we process raw sheets into custom finished parts. We regularly machine complex wear guides, outrigger pads, gears, bushes, and custom profiles based on customer engineering drawings.
We work with international logistics providers to ensure timely shipping, clear export documentation, and smooth customs clearance. This allows us to deliver high-performance polymer products reliably to project sites and warehouses worldwide.
We maintain an independent testing laboratory and dedicated R&D team, staffed with experienced material, technical, and production engineers. By working closely with universities and research institutions, we continue to develop and refine our engineering plastics portfolio.
Our manufacturing and processing lines operate under strict quality frameworks. We provide complete testing reports, material datasheets, and certification records (including ISO 9001:2015, SGS, and BV) to ensure transparency and consistency for every delivery.
Ensuring our products meet international regulatory codes, environmental standards, and local specifications.
All plastic additives, stabilizers, and pigments are fully compliant with EU REACH regulations and RoHS directives. Our materials contain no hazardous heavy metals or prohibited phthalates.
Specific raw formulations of our UHMWPE, HDPE, and POM comply with FDA food-grade contact requirements, making them suitable for clean food packaging and processing machinery.
We utilize standardized ASTM and ISO testing protocols to verify mechanical and physical properties. Every batch can be supplied with complete COA (Certificate of Analysis) reports.
We coordinate with overseas technical partners to assist with on-site installation, structural inspections, and custom design sizing for large-scale engineering projects.
Answers to common technical, design, and procurement questions about self-lubricating UHMWPE + MoS2 sheets.
Detailed view of our engineering plastics series and custom solutions.
Designed for high wear and impact resistance, making it suitable for material handling systems, hopper liners, and guide rails.
Self-lubricating, non-water-absorbent engineering sheets that provide reliable wear and friction performance across industrial applications.
A sustainable engineering plastic option that balances wear resistance and durability with reduced environmental impact.
A versatile polymer that can replace steel or aluminum components, helping save weight and reduce operating costs.
High abrasion and impact resistant blocks, ideal for machine rails, impact surfaces, and heavy-duty sliding guides.
Tianjin Beyond aims to exceed expectations and serve as a reliable, long-term industrial partner. We adhere to our core principle: “quality + speed + service = value”.
From the moment raw materials enter our factory, through production, processing, and finishing, we carry out strict quality inspection and monitoring in accordance with our ISO 9001 systems. We verify raw materials, inspect samples, run random checks during production, and issue COAs for finished products to ensure that our output meets specification requirements before shipment.
View More ServicesDiscover our comprehensive range of engineering plastics, machined rods, and specialized wear plates.
We manufacture and machine a broad range of standard and custom plastics.
Heavy Equipment Road Mat Ground Protection Mat HDPE Temporary Road.
1mm - 200mm Gray Color Engineering Plastics Polypropylene PP Sheet.
Blue 1000*2000mm or 620*1220mm Thickness 8-200mm Nylon PA6 Sheet.
Colored solid nylon rod PA6 high wear resistant nylon bar.
HDPE sandwich 3 layer double color plastic sheet for garden play equipment.
15mm 20mm 200mm POM white sheet delrin POM sheet machining.
4X8 FT PE Ground Protection Mats for heavy construction equipment traffic.
Extruded high rigidity PP sheets for chemical tank fabrication and lining.
HDPE Double Color Plastic Sheet for recreational structures.
Customize UV Resistant 1-3 Layers PE 100 300 500 1000 Colored Core HDPE Sheets.
HDPE sandwich 3 layer double color plastic sheet for playground equipment.
Extruded 1mm 5mm POM delrin sheet for structural and mechanical wear applications.
Beyond